A1/A1 Mini Extruder Icon - Nuclear

This model is created by Make My Sign
Make Your Model

Print Profile(1)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A133 min
4.7

32
41
15
78
32
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Description

So, you want to personalize your A1 Mini a bit, do you?
Well, you've certainly come to the right place!

Presenting the A1 Mini Extruder Icons!

They spin with the extruder gear, just like the original icon!

In the following days/weeks, I will be uploading a lot of different Icons, which can be mounted to the A1 Mini Extruder.
And I've decided to the go with “external” Icons, as that provides a lot more space for being creative with the models.
It also just looks kinda cool, that they are just sticking out from the printer like that, don't you think?


Installation Guide & Explanation

Below, you'll find a guide on how to install the icon. And don't worry about removing the Window from the Front Cover. It is a non-permanent modification. You can always put the window back in.
(Bambu Lab has even uploaded their own Icon model to MakerWorld which requires window removal. So, removing the window is not damaging to the printer)

 

First Installation

The first installation takes the longest (although still quite straightforward and simple) - all subsequent installations are significantly easier and faster!

  1. Remove front cover
  2. Remove the original extruder icon by pulling it away, straight, from the tool head
  3. Remove window by pressing on it from the outside
    (Tip: You can attempt to simultaneously press on the inside clips (marked wiith red on the picture for this model) to make the window pop out a bit more easily)
  4. Reinstall the front cover
  5. Press your new icon through the whole, where the window used to be, and onto the metal rod, where the original icon was located. It should be a snug fit to ensure it stays in place.

It really is simple, once you try it out yourself.


Subsequent Installations/Switching Between Icons
Once you have done the first installation, switching to a different one of my Icons is extremely simple.
You don't need to remove the front panel or anything. Simply pull the current icon off the printer, and press on another one.

Simple as that! 5-10 seconds, top!


On my profile, you will find many more Icons.
Remember to check out the Display/Holder for the icons as well - in case you decide to print multiple and need a way of storing them!
(Bonus! Depending on your printer's tolerances, the Display/Holder has a loose enough fit to make the icons spin around freely. It is quite the fidget toy! Try printing the holder for just 1 icon and have it by you at your desk. It can become quite addicting to spin the little icon around!)



The Icons themselves were created using Make My Sign in Maker Lab.
(Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)


License

Comment & Rating (15)

Please fill in your opinion
0/5000

Print Profile
0.2mm layer, 2 walls, 15% infill
printed 2 for my A1s love them!
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
love your profiles
0
Reply
charming :)
(Edited)
0
Reply
is it possible to make one for the p1s?
The designer has replied
0
Reply
If I recall correctly, the P1S doesn't have a visible extruder like the A1's - so I'm afraid it's not possible :-(
0
Reply
well thanks anyways
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great but can be easily flicked off.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
good, just broke the front dome, do not print unless you are willing to break some of the a1 mini
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
simple and easy to print
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply

Remixes (0)

There are no remixes yet