Biggest Trading card box. Barely fits the bed! Remixed by Darkwing

Remixed by

Darkwing

Hobby & DIY>Other Hobby & DIY

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

15.7 h

4 plates

4.9(35)

Fuzzy Skin to prevent warping

16.7 h

4 plates

4.4(8)

MTG Plainwaker Logo

15.9 h

4 plates

Open in Bambu Studio

Boost

201

435

550

279

Released

Description

On FilamentWizards design noticed a screenshot of a trading card storage box that is 3 of the regular boxes combined, however when i downloaded the file it doesnt fit the Bambulab build bed at all.
I redesigned it, combining it with all my tweaks that i applied to the regular boxes and i made it fit the bed, Barely!

Please note that printing a object that is as big as this comes with warping challanges!
Even if your layer adhesion is great the print will yust pull up the corners of the magnetic build plate !

The print profile i uploaded has reduced cooling to reduce this effect. but it might be needed to tape the magnetic build plate to the machine.

Comment & Rating (81)

@TaysomsTreasure

Boosted

I love the box. I definitely had the dreaded warping issue with my first print but when I started thinking about warp like this I thought I would try the fuzzy skin setting to greatly reduce the amount of long straight lines and it worked like a charm. I highly recommend it to everyone for this model. I added a modifier to the area where the lid goes to prevent fuzzy skin there.

The designer has replied

@Darkwing

amazing out of the box thinking ! i switched to the new supertack bed and it solved the issue for me. you should upload your print profile to the model page to help the other people who wanna try your solution!

@TaysomsTreasure

Boosted

Replying to @Darkwing :

Done!

(Edited)

@BunnySounds

Boosted

Replying to @Darkwing :

The Supertak had the issue for me still with the default profile, but its not as bad and still usable. Did you change anything else to get it to work without fuzzy? I was thinking possibly lowering bed temp from 45c, slow down, drop nozzle temp, drop cooling more? Dont want to build a second box just to have it go worse though.

@rbienz

Boosted

Thank you for this amazing remix! We loved it so much that we created our own Pokémon look & feel remix and made a few additional optimizations. You can find our Pokémon-style remix here: https://makerworld.com/de/models/950390#profileId-918203 🎨✨ For our print, we used a 3D effect build plate with a carbon fiber look, along with Polymaker Panchroma Matte PLA (formerly PolyTerra) in Lava Red, Charcoal Black, Cotton White, and Ash Grey for the spacers. We’re absolutely thrilled with the look and functionality of the box! 😊

The designer has replied

@rbienz

Boosted

We also remixed and printed a matching deck box to go with the storage box. It pairs perfectly and completes the set! If you're interested, you can find the deck box here: https://makerworld.com/de/models/950299#profileId-918109 🎴✨

@Darkwing

That's awesome mate! If you want you can upload your Pokémon edit as a print profile to my model page.

@Nicragomi

That looks awesome! Would anyone be able to make a MTG version of this? With the Planeswalker symbol on the lid? I'd throw money at that lol.

@MrGnarly

Boosted

Giving it a shot in PETG, thanks for the upload

The designer has replied

@Darkwing

Why is your print time more then 1 day? I does petg print so slowly?

@MrGnarly

Boosted

went well. it's a voron v2, not a bambu and nah I don't speed print petg.

@user_1510369858

I love this print! I've done one for myself as well as one for each of my boys. I've also just uploaded a print profile including the taller dividers I made so that they stay in place even when the box is turned over. As a mum of two ADHD boys, I could just see the disaster waiting to happen even with the thicker dividers! Now they stay in place even with the box flipped upside down. :)

@Zanibytes

Great box, easy print. Customized it a little. No warping with brim for the box, tried lid without and it warped a little on Bambu SuperTack. Filament: Bambu Purple PLA Sparkle, Bambu Gold PLA Sparkle

@user_3083730140

Beware printing this on a A1, mine moved and shifted the build plate off of the machine by 6 inches and kept printing. Ended up scratching the frame on my screen. :(

@user_446837803

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed flawless with Sunlu matte PLA and some glue stick.

@WonkyDonkey

Print Profile

Fuzzy Skin to prevent warping

Interesting that it printed over the purge line - not sure if that was supposed to happen 🙈However it turned out great with the fuzzy walls. A teeny tiny corner lift right at the very very end, but final result not affected.