FilamentWizard

cover

plate_1.png

plate_2.png

tco.png

Single Box

Divider.png

Dividers

Storage Box and Lid

chuhuhu

IMG_5819.jpg

IMG_5820.jpg

IMG_5821.jpg

IMG_5822.jpg

A1 mini print profile, 0.2mm layer, 2 walls, 15% gyroid infill&nbsp;Changed original model to allow it to be printed on the A1 mini printer by splitting and reassembling the body of the storage case. This allows for the dividers from original print profile to be used in the A1 mini version without scaling any parts. &nbsp;Re-made the lid and increased the height to allow for penny sleeves to fit into the storage case. Also decreased wall thickness of the inner lower wall of the lid to allow for lid to fit when cards are placed at the ends of the storage container. &nbsp;Added a print plate with four dividers for the A1 mini, as the original print profile had nine dividers and could not be printed from the Bambu Handy app. &nbsp;Total length, width, and height of the printed parts are: <ul><li>175 mm by 80 mm by 102 mm (storage box with lid). </li><li>175 mm by 80 mm by 80 mm (storage box only).</li><li>175 mm by 80 mm by 32 mm (lid only).</li></ul>Inner dimensions of the storage case is approximately 169 mm by 68 mm by 95 mm. &nbsp;&nbsp;

For A1 mini, 0.2mm layer, 2 walls, 15% gyroid infill

plate_3.png

mintpostit

IMG_3697_51450668-b641-4d5d-996c-fc243e54605f.webp

0.16mm layer, 2 walls, 15% infill

Dale Smith

IMG_9778.jpeg

Wider box, wider dividers, and taller lid to accommodate sleeved cards and cardboard deck boxes. Un-sleeved cards still fit nicely.Also tuned the slicer settings to be a couple hours faster to print (for the main organizer).&nbsp;Note: this will fit soft sleeves (e.g. Dragon shield &amp; penny sleeves), but not the rigid 3x4&#34; top-loaders. Another user has provided a profile for top-loaders.&nbsp;

2 Hours Faster | Wider for soft sleeves & deck boxes

4 Dividers

Base

colinrs33

IMG_3367.jpeg

IMG_3366.jpeg

IMG_3361.jpeg

IMG_3362.jpeg

Fits cards in standard size Toploader hard sleeves.

Toploader Size - Fits A1 Mini

MoleculeMatt

20250406_131720.jpg

I ran into some adhesion and printing issues on the standard profile so I switched this to default settings. Results in a faster print time and more conssitent print.

PETG-HF, 0.2mm layer, 2 walls, 15% infill, faster print

abdb

IMG_2690.JPEG

IMG_2689.JPEG

Lids with no inner lip for the large box and the A1-mini box. These lids are thin, and may not feel as “sturdy” as the original lids. This is by design, and helps prevent crushing or bending of cards by the inner lip on the original lid. Lids are slightly taller to accommodate dividers.

Lids With No Inner Lip

fatReeG

Untitled.jpg

Made a voronoi divider to be more efficient with filament. Used the outline of the wider box one since I printed the wide box.  I printed this with a 0.6mm nozzle (printed the whole box 0.6mm, 0.3 layer standard, 15% crosshatch - 7 hours). But it should be fine with 0.4mm nozzle.  One corner needed to be fixed up - just used my nail to scrape it down.

Voronoi Card Divider for Wider Box Print Profile

RENzvd

20260609_121308.jpg

Bigger Divider for Booster pack name

Created to bring together and arrange your collection of trading cards. The modular design, with dividers, allows for easy customization. You can even keep extra separators at the front and back of the box, ensuring flexibility for your evolving card collection.If your printer tends to warp, consider using a brim, especially when dealing with the sizable flat surfaces and extended print times required for this community-oriented card storage solution.

Trading Card Organizer

Hunkly

photo_4_2026-05-07_14-03-32.jpg

photo_2026-05-02_20-30-03.jpg

photo_5_2026-05-07_14-03-32.jpg

photo_6_2026-05-07_14-03-32.jpg

photo_2026-05-02_20-30-04.jpg

Pokemon TCG Organizer with multiple variations

aash

tempImage5BI6Nc.jpg

IMG_3888.gif

Latching Trading Card Organizer

ASIA

Print Profile(10)

Bill of Materials

Description

Comment & Rating (491)

License

Remixes (13)

Related Models