Simple Key Organizer - Free 3D Print Model

Search models, users, collections, and posts

plucbernier

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 25% infill

Designer

28 min

1 plate

4.7(9)

Open in Bambu Studio

Boost

232

214

127

Released

Description

Here's a simple key organizer to help you carry your keys in a simple, compact way! Can contain up to 5 keys.

You need a M3 screw (lenght depends on the number of keys) and a M3 x 4mm heat insert.

Comment & Rating (13)

@LeoHD

Print Profile

0.2mm layer, 6 walls, 25% infill

Works great for my work keys

@Griver

An alternative version with nut would be great on this model

@theseppo

Print Profile

0.2mm layer, 6 walls, 25% infill

dimensions do not work for heat insert - is way too lose. Tested several heat inserts. and of corse on the correct side. (neither side fits)

The profile uploader has replied

@plucbernier

I’msorry to hear that! I will recheck everything from my side! did you try to just press fit the insert in the hole! that’s what I did and it worked great. probably that the heat softened the plastic a little too much. I should put two different profiles. thanks for your feedback on this build!

@theseppo

Don´t know if it is me, the model or wrong heat insert. But the m3 heat insert is way to small. M4 is too big. :(

The designer has replied

@plucbernier

Hi, make sure you use the right hole for the insert. there’s one bigger on the opposite side to accommodate the screw head

@marvins_dad

Print Profile

0.2mm layer, 6 walls, 25% infill

Worked perfectly, exactly what I was looking for. Had some leftover hardware that fit perfectly. Now my daily carry.

@user_4044342441

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill

@user_1593471484

Print Profile

0.2mm layer, 6 walls, 25% infill

@SatansLilHelper

Print Profile

0.2mm layer, 6 walls, 25% infill

@Lilianlb

Print Profile

0.2mm layer, 6 walls, 25% infill

@user_1889590083

Print Profile

0.2mm layer, 6 walls, 25% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.