Plate Holder for Bambu P1P P1S X1 X1C X1E Cool Textured Engineering by Chester3D

Chester3D

3D Printer>3D Printer Accessories

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

59 min

1 plate

4.8(187)

Multi Color - Gyroid Infill 0.2mm

1.7 h

1 plate

4.8(5)

0.2mm layer, 2 walls, 10% infill

50 min

1 plate

4.3(7)

Boost

263

546

225

1.2 k

951

Released

Description

Solid and stylish stand to keep the plates of your Bambu P1S / X1C / X1C / P1P organized and easy to access!

Allows up to 4 plates, whether textured, engineering, or cool plate. Each plate is located at a different height in this stand, so you can access each one regardless of its position.

This is a quick and easy print.

No supports, no brim, no overhangs!

🛒 Textured PEI recommended.

⭐Easy installation: Lift the printer slightly on one side and insert the piece from bottom to top. Find the right position by sliding this printed stand forward or backward until you see that it fits perfectly.

If you like it and found it useful, I appreciate your comment sharing a photo of your printer with this printed model! You will make me very happy (and if you leave a like, even more 😊😊).

Remixes allowed!

--------------

Another MUST HAVE mods:

Top Glass Riser P1P / P1S / X1C / X1E

PTFE Toolhead Clip (AMS Unload Fix)

Comment & Rating (225)

@CaptDavee

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect Fit Thanks !!

The designer has replied

@Chester3D

Thanks for sharing your result! Also note that the plates in this support/stand, are inserted as in the attached image, with the part indicated by the arrow facing down!

@CaptDavee

Replying to @Chester3D :

Oops thanks

@Chester3D

Replying to @CaptDavee :

Anyway, you can actually use it however you want :)

@waterl0u3d

Print Profile

0.2mm layer, 2 walls, 15% infill

UPDATED! It fits once the plates are oriented the right way as the designer intended it to! it currently sits “hanging on the side” and it works! Will probably have to make another one now for both sides since I need more slots. Thanks again!

(Edited)

The designer has replied

@Chester3D

Oh! How is that possible? The slots have a thickness for straps up to 1mm thick, the original BambuLab Textured ones have a thickness of 0.70mm, the Engineering Plate 0.60mm and with adhesive 0.80mm, I have tried all these plates and they fit perfectly. If your straps are 1mm or more (which seems very strange to me, they would be excessively thick) they will not fit, but I have not seen straps with those thicknesses to date. If you need it, I can make a version with thicker slots, if you tell me the thickness of your plates :) Thank you!

@Chester3D

Also note that the plates in this support/stand, are inserted as in the attached image, with the part indicated by the arrow facing down!

(Edited)

@waterl0u3d

Replying to @Chester3D :

ahh this helps! thank you so much. ive updated it now :)

(Edited)

@stedechamp

Print Profile

0.2mm layer, 2 walls, 10% infill

très pratique et efficace.

@dario.hidalgo9

Print Profile

Multi Color - Gyroid Infill 0.2mm

it fits perfectly

@cpt.sergio.k

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice print. I cut out the rear tab cause I wanted to stick it on to a wall.

The designer has replied

@Chester3D

Awesome! You could upload a remix, I'm sure there are people who would be interested in your version :)

@user_2040774660

Print Profile

0.2mm layer, 2 walls, 15% infill

kleiner Materialaufwand, aber perfekte Funktion 😁👍🏻

The designer has replied

@Chester3D

Thanks! 😁😁

@feld42

Print Profile

0.2mm layer, 2 walls, 15% infill

Fonctionne très bien

@bikerbasti

Print Profile

0.2mm layer, 2 walls, 15% infill

Thanks for the simple design, just what I was looking for. It printed nicely and without any issues. Since I only have 2 plates, I cut it down with Bambu Studio to only hold two at a time. Works flawlessly.