Mini Screwdrivers - Free 3D Print Model

Search models, users, collections, and posts

Shop Therapy

Tools>Hand Tools

IP Report

Print Profile(7)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Complete Set - 0.15mm layer, 2 walls, 15% infill

Designer

1.8 h

1 plate

4.6(35)

Phillips - 0.15mm layer, 2 walls, 15% infill

Designer

41 min

1 plate

4.8(13)

Flathead - 0.15mm layer, 2 walls, 15% infill

Designer

41 min

1 plate

4.8(4)

101% Scale - 0.15mm layer, 2 walls, 15% infill

Designer

1.8 h

1 plate

5.0(1)

Click to see more

Open in Bambu Studio

Boost

256

651

627

393

Released

Description

Check out my profile and print VERSION 3 of these mini-screw drivers. It is a much better model with better tolerances!

These are mini screw drivers that are perfect for stocking stuffers! Would be good to keep in a car or kitchen junk drawer when in a pinch.

I printed these in PLA.

My machine (Bambu P1P) is really dialed in, and I have the perfect snug fit for the bits. However, if yours is too tight, you can scale it up by 1-2%. If you print these in PETG, you may also need to scale it by 1-2%, because PETG shrinks more than PLA.

I printed these at either layer height of 0.1 or 0.15. I have not tested 0.2. With the small threads, the smaller layer height is better!

The threads are tight at first but will loosen up and work perfectly after you use them a dozen times. I usually just open and close the cap 20x right after printing and then they work well.