Search models, users, collections, and posts
Stray Kids Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
5.7 h
1 plate
Open in Bambu Studio
Boost
55
98
20
12
126
60
Released
Description
Boost Me (for free)
Project: Stray Kids 2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 153.59x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Jade White
At layer #13 (1.12mm) swap to Red
At layer #16 (1.36mm) swap to Beige for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (20)