Suspended Millennium Falcon Remixed by fay3dlab

Remixed by

fay3dlab

Miniatures>Other Miniatures

Print Profile(5)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

12.6 h

1 plate

4.9(331)

MULTICOLOR 0.2mm layer, 2 walls, 10% infill

Designer

27.4 h

1 plate

4.8(33)

0.2mm layer, 2 walls, 15% infill, fixed the non-flat first layer issue with the original model

14.9 h

1 plate

4.9(113)

[Lighter and faster]0.28mm layer, 2 walls, 8% infill

10.9 h

1 plate

4.7(18)

Click to see more

Open in Bambu Studio

Boost

1387

2431

700

248

7.9 k

2.4 k

Released

Description

I saw πxel8ed version of the suspended millenium falcon and i was inspired to make my own version..
i thought making the ship facing front with the strings looking like the streaking of lightspeed.. the falcon model by aaskedall from thingerverse was already a great design so i just used his model as a remix.. i did have to slightly change the model so it will print for a smaller version for my suspended millenium falcon..

UPDATE:

I have uploaded a new version model V3 that can be color picked for multicolor printing.. just learned how to do it.. unfortunately i cant edit the old print profile.. so you'll have to add them manually

UPDATE 2:

I made a LED version of the suspended millennium falcon that is backlite using led strips.. it is an addon part that will connected to the suspended ship.. so you just have to print the addon LED parts only.. not the whole ship..
i've upload the file at https://makerworld.com/models/113145

Comment & Rating (700)

@MakerThingy

Print Profile

0.2mm layer, 2 walls, 15% infill

Thank you so much for this, it looks exceptional, cannot believe it, I am an absolute beginner, and to still be able to print something like this, in one go, incredible. The Force is strong in you I also did my first ever youtube with the timelapse of this 🎥 https://youtu.be/uzzCmXfWzKA?si=ilydGPjidBriOlWE (lighting is just LED stuck to the back and textured plate black flat print, would look better with a bigger box enclosure and more angled lighting, this was a quick display set-up, but a more planned, designed one will make this look even better) Amazing model

(Edited)

The designer has replied

@fay3dlab

It's not just the model.. It's also the awesome bambu printer

@Tomm1999

Replying to @fay3dlab :

Have you noticed the bottom of the model (main milenium falcon model) is lower than the outer ring? Its off by .6mm on the V3 model, V2 is good

(Edited)

@fay3dlab

Replying to @Tomm1999 :

damn.. i might have forgotten to flatten the bottom to align with the frame.. it s because i V3 is for multicolor so it might not have align properly.. thanks for the heads up.. i'll repair it

@genghisplays

Print Profile

0.2mm layer, 2 walls, 15% infill

Listen.. being a guy who has half sleeves of Star Wars tattoos.. this has to be absolutely the coolest star wars thing I've done for myself! Love this model 😍

The designer has replied

@fay3dlab

we need a photo of that half sleeve with the millenium falcon.. ahahahhaa

@genghisplays

Replying to @fay3dlab :

it's kind of difficult to capture good photos but R2 and C3PO say hi! You can barely make out my Millennium Falcon and X-Wing as well!.. more stuff on the back side and on my other arm 😅

@fay3dlab

R u going to color it? Or just outlined like that

@jeffrey.wilkins

Print Profile

0.2mm layer, 2 walls, 15% infill

Thus is one of the most impressive 3D prints I have ever seen. pretty amazing.

The designer has replied

@fay3dlab

Thank you.. I also made an addon to attach LED light strips to the millennium falcon.. Do check that out too..

@user_3610563000

buenas tardes me impresiona este modelaje, queria preguntar si se ha utilizado soportes y si solo lo habeis probado en Bambu, yo tengo una ender 3v3 se.

@cwhit73

Print Profile

0.2mm layer, 2 walls, 15% infill, fixed the non-flat first layer issue with the original model

Printed beautifully with no issues. Used a Gold/Silver Silky PLA with stunning results. Thank you for sharing.

@ireneusbs

Hello Fay3dlab, your Model ist fantastic, but there is a small fault on the outer shell. This Line is not fixed to the shell.

The designer has replied

@fay3dlab

owh ya.. now when i look at it.. i do see a small rectangular that is not attached to the frame.. its floating on its own.. let me get right on it

@CameronS

Print Profile

0.2mm layer, 2 walls, 15% infill, fixed the non-flat first layer issue with the original model

excellent. zero issues.

(Edited)

@julian.norway

How much did you scale it down to fit? I am printing it at 97 % as 98 % was more than 180 mm

@CameronS

Replying to @julian.norway :

it worked without anything for me. got lucky. my kid broke the strings about an hour after it finished so had to glue it with a stand.

@mcrone

I only ended up with suspension strings on one side after slicing. Unfortunately didn't pick that up until after printing! Any ideas?

The designer has replied

@mcrone

Re-sliced it from scratch and problem went away, I guess something went wrong when I added colours.

@fay3dlab

wow.. how did that happen.. i dont think its the wall generator settings.. cause its printing one side.. you might want to check the if the model is leveled to the plate.. you could also download the V2 version with the LED light and see if its still the same

@mcrone

Replying to @fay3dlab :

It was the resizing.. Think I had it at 50%.. If I took it back up towards 100% they reappeared.