HSV Lightbox
Copyright Claim
HSV Lightbox
Boost
11
29
14
Print Profile(3)
0.2mm layer, 2 walls, 6% infill
Designer
4.8 h
2 plates
0.2mm layer, 2 walls, 15% infill
Designer
5.8 h
2 plates
0.2mm layer, 2 walls, 15% infill
Designer
5.6 h
2 plates
Open in Bambu Studio
Boost
11
29
14
3
75
114
Released
Description
Update 14.3.2024:
I Added a Version with 4 Layers for more stability and a Version with support Layer if you have problems that the parts dont stay connected
Use my print profile, it printed perfect on my P1S.
Electronics:
I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wires
The power supply and the DC barrel connector I used
https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details
Assembly:
- Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill.
- Measure the length of the light strip and then cut it to length.
- Solder the wires and the barrel connector to the light strip
- Mount everything into the front part
- Fore the back part I used normal aluminum foil with some double sided tape to reflect the light. See pictures
- Close the box
For more details check this light box.
Comment & Rating (14)
All
Print Profile
0.2mm layer, 2 walls, 6% infill
Sieht beleuchtet und unbeleuchtet einfach nur schön aus
1
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
Hane als Beleuchtung auf COB LEDs umgestellt um diese auf 5V Basis zu betreiben. Auf der Rückseite USBc Buchse verbaut und dann gehts mit Powerbank oder einfachen Ladestecker für Handys.
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
hat perfekt geklappt
1
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
Leider falsch designt. Zu dünne farb Fläche verfälscht das Bild und die Farben. Teilweise reißt die Box komplett ein an der Front. Rate vom Druck ab
(Edited)The designer has replied
0
Reply
Habe eine Version mit 4 und 5 Layer gemacht...
(Edited)0
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
lässt sich sehr schön drucken
(Edited)0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice print, works on X1C
0
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 6% infill
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 6% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld