Pooch made an awesome hexagon tile to remember Sanjay, and i was working on my hexawall project. So i made a element with a led strip that lights up the Sanjay hexagon.
Everything just fits together.

All the printed parts, the hexagon with Sanjay is printed in 2 colors.
(easily done with PrusaSlicer)

Step 1: Add the Sanjay hexagon in the outer shell

Step 2: Use the adhesive tape to add a led strip, do this close to the top for the best diffusion

Step 3: Insert the inner shell with the led strips.

Step 4: Add the back plate, there flat spot is for the wires.

Step 5: Add the triangles and the clips on the left and right bottom side as feets.

Power up the led strip and you are good to go! I have used a fancyboard.io for this project.