Multiboard bin system v2

Every multiboard needs to have some bins to put stuff in. Need any useable size you can just attach end easily remove, use the multiboard bin system.

Note: This is version 2 of my multiboard bin system. Differences from the first version are:

• Better optics
• Bins use the optimised multiconnect backs, which allow for more easy handling

Note: You may also like the open bins I created, which allow easy front access.

Howto use: You will need at least one multiboard connector for each edge of the bin, but may use as many as you like. Connect those to the multiboard, then just slide the bin over all the connectors. The bin should “click” in when pushed down.

If you want to remove a bin just push it up again. You may then reconnect to any other connectors.

Sizes: The multiboard bins use a XxYxZ naming schema where:

• X is the width of the bin
• Y is the depth of the bin
• Z is the height of the bin

All sizes have to be multiplied by the 25mm multiboard grid size. So when the bin is named “3x2x1” it is 75mm wide, has a depth of 50mm and a height of 25mm.

Note: Version 2 is still work in progress and I want to create more sizes. After this has been on my drive for several weeks now I decided to upload everything that I already have. If you need some particular version (aka size) of the bins feel free to send me a message. 👍

Warning: The multiboard grid is pretty small. This means that 1x1x1 bin just 25mm x 25mm x 25mm. Please ensure you really get a bin that is big enough.

Credits to Jonathan (KeepMaking) for creating multiboard.