Search models, users, collections, and posts
Voron 2.4 PG7 Mount for Galileo 2
IP Report
Print Profile(1)
0.16mm layer, 6 walls, 45% infill
Designer
1.5 h
1 plate
Open in Bambu Studio
Boost
8
10
1
1
49
6
Released
Bill of Materials
List other parts
- M3x40 x 1: Stock bolts from the Galieo 2
- m3x50 x 1: Stock bolts from the Galieo 2
Description
I made this model to work for my application with the LDO Nitehawk and Voron 2.4, This is not motor mounted but fits the existing slot for the cable chain and the mounting point on the Galileo 2.
Printed in Polymaker ASA with 6 walls and 6 bottom and 6 top layers with 45% crosshatch or gyroid infill.
I started with the basic idea from this link: https://thangs.com/designer/MandicReally
Requires only 2 M3 bolts- 1(m3x50 for the top spacer) and 1(m3x40 for the bottom spacer)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)