Print Profile(1)
Description
The image was captured from FB & processed in Hueforge. The result was brought into Bambu Studio where the 6 colors were added at the Hueforge defined layers. Save & print!!
- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
- The Model is 200x198.47mm in size
- You may print at higher layer heights below the Min Depth of 0.48mm
- The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Aqua Blue Transmission Distance: 2.5
PLA EL3D Grey Transmission Distance: 0.3
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Pro Orange Transmission Distance: 7.5
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
PLA PolyLite White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #13 (1.12mm) swap to Aqua Blue
At layer #15 (1.28mm) swap to Grey
At layer #16 (1.36mm) swap to Red
At layer #17 (1.44mm) swap to Orange
At layer #18 (1.52mm) swap to Lemon Yellow
At layer #19 (1.6mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)