Bambu LAb X1C P1P P1S Double wipe V2

Bambu Lab P1P/P1S and X1C Double Wipe Version 2

The best solution to fix problems with the original nozzle wiper.

EDIT 06/12/23 - I have reuploaded a 2mm and a 3mm version, as I seem to have messed them up when first uploaded. Please use correct thickness Silicone.

The standard nozzle wiper worked most of the time but after this mod, it works every time!
I wanted to add a silicone sheet to the wiper but also retain the stock wiper.

I recommend printing in ABS or PETG so it withstands high chamber temperatures.

Instructions (Based on 2mm version)

1. Remove the stock nozzle wiper from your printer and screw it to the Nozzle Wipe V2.
2. Cut a 14mm x 13mm piece of 2mm Silicone sheet (Link below) and slide into the slot.
3. Use 1 of the spare screws that came with the spare wipers to attach the Nozzle Wipe V2 to your printer.

And that's it! Enjoy a clean nozzle with every print.

Please note printed picture is of previous Version

You can buy silicone sheets from the link below. Please make sure to select 2mm!!
https://s.click.aliexpress.com/e/_EJsVoMd