Bambu Lab Side Spool Holder P1S / P1P / X1C by Maker Tom

Maker Tom

3D Printer>3D Printer Accessories

IP Report

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 100% infill

Designer

3.5 h

1 plate

4.8(333)

Optimised for filament usage, speed, strength, and multicolor

2.5 h

1 plate

4.7(107)

(2) Light Duty Bearings for this Model

26 min

1 plate

4.6(25)

ASA ADAPTIVE, 6 Walls, 20% Gyroid Infill

2.9 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

986

2096

570

218

4.3 k

2.9 k

Released

Description

My Version of a stable Side Spool Holder.

The Holder an the Filament Guide can be printed support free.

Printing the Role upright.

The PC4-M10 thread should fit well

Best printed: Infill 100%

Apart from printed parts you will also need:

4x M3x20 screws
2x 608 ZZ ball bearings (8mm x 22mm x 7mm)
1 x PC4-M10

Have fun printing

Comment & Rating (570)

@likwidkool

Print Profile

Optimised for filament usage, speed, strength, and multicolor

Printed and works great. Some old Bones Reds bearings came in handy. Just waiting on my pc4-m10 connectors to get here. I used M3 12mm on the tube holder as 20mm seemed way too long.

@Joshua_

somehow 20mm is the perfect length

@Joshua_

thank you for rating!

@megazoni

Replying to @Joshua_ :

On my X1C, the two holes for the filament guide are 9mm apart and the model is 10mm. The spool holder fit correctly though. Also, 20mm screws for the filament guide are too long for my machine. Those two holes bottom out very quickly and I had to use a 12mm.

@TomTom_S.

Print Profile

Optimised for filament usage, speed, strength, and multicolor

Bei dem hier integrierten Profil hatte ich Warping-Probleme an der PTFE Führung woraufhin ich den Druck dann abbrechen musste. Die Dateien selbst geslicet war das alles kein Problem mehr. Schade dass der Radius an der Rollenhalterung nicht dem Radius am Drucker entspricht. Das ließe sich sicherlich in wenigen Minuten abändern und würde optisch deutlich besser aussehen als so eine Lücke dort zu haben. Für mich als kleinen "Perfektionisten" fast schon eine mittelschwere Katastrophe.

@Joshua_

my apologies. what did you change when you sliced it yourself? thanks for pointing out the problems!

@Joshua_

if you added a brim though, please make sure your bed was cleaned with a reputable brand of dish soap, not ipa. while ipa can work, a reputable brand of dish soap gets rid of most of that junk.

@TomTom_S.

Replying to @Joshua_ :

Ich Reinige mein druckbett noch jedem Druck. Ich denke nicht dass es eine Verunreinigung gewesen ist. Aber wer weiß das schon. Das Teil hat sonst tadellos gehalten, bis auf das Ende in dem das Fitting eingeschraubt wird.

@hktsenga

Print Profile

0.2mm layer, 2 walls, 100% infill

edge banding,I printed three times,had same problem,what’s happened?

(Edited)

@hktsenga

why I printed the holder,always bending at edge? three times,what happened?

@hktsenga

why I printed the holder,always bending at edge? three times,what happened?

@badmoon

Replying to @hktsenga :

you have poor bed adhesion. I recommend googling how to improve it. you could include a raft and skirt and may also need glue.

(Edited)

@AdVanceYourself

Print Profile

0.2mm layer, 2 walls, 100% infill

Wow what a difference this has made. New to the scene and was having to move my printer to change filament. This was easy to print although, I had to file down all of the edges of the roller and roller insert slightly to get it to roll with the bearings. Runs great and no more moving the printer!

@MakerTom

Thank you! I uploaded an improved spool as STL in the RAW Model files :)

@projectorize

Didnt quite get this work very well. After attaching the bearings and mounting the holder, its so much friction the center roll wont turn. Dont know what im doing wrong here? Also the spool holder bracket is not shaped after the printers corner, but maybe its not suppose to?

@Madnessx9

I've had the same issue but I tried sanding the bearing surfaces down (flat sides) and it actually freed up the movement quite a bit.

(Edited)

@Joshua_

@projectorize https://makerworld.com/en/models/411965#profileId-313885 this remix matches the radius of the bbl machine

@user_3159818589

Boosted

Print Profile

Optimised for filament usage, speed, strength, and multicolor

Print without issues, excellent fit, works perfectly

Show original

@Joshua_

Thank you for rating!

@donut.gaudet

Print Profile

Optimised for filament usage, speed, strength, and multicolor

printed excellently and is the perfect size to fit over my trash box for the poop chute

@Joshua_

thanks for rating! I like your pc

@bart47

Print Profile

Optimised for filament usage, speed, strength, and multicolor

Nice

@Joshua_

thanks for rating!

@turkishsteve

Print Profile

0.2mm layer, 2 walls, 100% infill

I only printed the filament guide as I had already printed a different side mount.. It printed fine, but I found that the angle didn't work well and there was a lot of tension and noise on the filament as it tried to feed. This is likely because I don't have the metal insert to go in the hole. I heated it up and bent it to a more favorable angle and it's working well.