Kawasaki LED Lamp

Copyright Claim

Kawasaki LED Lamp

Boost
72
110
12

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 100% infill
0.2mm layer, 2 walls, 100% infill
Designer
15.8 h
2 plates
4.7(11)

Boost
72
110
12
5
215
126
Released

Description

 

Introduction

The original model is designed for printers with a 250x250mm bed.

 

If for any reason it doesn't fit on your bed, you can resize the model to the size you want from your slicer.

 

It consists of two parts, the lamp body (body.3mf) and the rear cover (lid.3mf).

Sometimes I include two lids, with and without a hole (choose the one you want, I recommend printing the Lid with hole whenever possible, to be able to remove the LED cable).

 

If the back cover does not have a hole, you can easily make it from Bambu Studio, or from any other slicer you use.

 

 

 

You will need

Optional, but recommended:

 

 

Assembly instructions

You can follow either of these two videos to assemble the lamp. It's very simple, you stick the LED strip inside and that's it. If you want, you can use aluminum tape to improve the lighting, although it is not necessary:

 

 

 

Printing settings

Following recommendations, you can start with these settings in Bambu Studio:

  • Preferences (CTRL + P) → Activate developer settings → Quality → Advanced → First Layer Flow Ratio: 1.04
  • - Quality → Wall generator → Arachne
  • - Quality → Wall transitioning threshold angle → 50 degrees
  • - Strength → Advanced → Infill/wall overlap → 20%
  • - Quality → Advanced → Avoid crossing walls
  • - Increasing retraction / reducing temperature can help reducing wisps
  • - Order color printing from lightest to darkest color

 

Important! Additional tips

Remember to remove the purge line at the start printing, otherwhise it will ruin the print.

Adjust the sequence of colors from Light colors to Dark colors, to prevent stringing.

 

Comment & Rating (12)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 100% infill
settings for back are slow and first attempt tge print paused at 32%. printed on color and worked fine.
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
0
Reply
Nice, easy print.
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
perfect
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 100% infill
0
Reply