BambuLab poop chute with magnet holes by Ga Design

Ga Design

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 10% infill

Designer

5.9 h

1 plate

4.8(253)

0.28mm layer, 2 walls, 10% infill

4.1 h

1 plate

4.9(16)

Open in Bambu Studio

Boost

229

441

305

2.1 k

1.6 k

Released

Description

BambuLab poop chute with magnet holes. Magnet diam 6mm x h 2mm

WARNING - This version is meant not designed with big multiprint volumes in mind. I have developed a wider version optimized for multi color print. Click this text to be redirected to the MultiColor print version

poop chute

magnet

Comment & Rating (305)

@thetonestarr

Poops constantly get stuck in mine and it doesn't properly drain em into the bucket. I took the actual chute section of the model and made it 2x as wide - will see if that remedies the problem.

The designer has replied

@GaDesign

thank you for the feedback, I collected so far more than one kg on poop but never got it stuck. could it be that you print a lot of multicolor with maybe a lot of purging? I wonder if when purging a big amount of PLA it could get stuck due to it

@TigressAndFox

having the same thing happen

@VKeeper42

I agree. Thank you. My poops were getting stuck and clogging up very quickly with the original design

@hans.j.pedersen

Print Profile

0.16mm layer, 2 walls, 10% infill

came out just like the picture. this set and go ecosystem is truely amazing, perfect placement of the seam making the finished product look like it was sold seperate as a thirdparty option. the horizontal limes are from me changing the speed a few times to just laugh at the thing zooming around so fast😂 well done sir. well done

The designer has replied

@GaDesign

thank you :)

@SaschaD

The Link in the Text seems to have a 404 issue

The designer has replied

@GaDesign

You are right, there has been a problem in the approval process. I hope I have solved the issue now and the new version should be up in matter of hours hopefully

@Azzad_Ipsw

Great Print thank you. only could find my really really small magnets so glued 3 in each.

@user_1160733299

Print Profile

0.16mm layer, 2 walls, 10% infill

suburb design

(Edited)

@scottgmccarty

Print Profile

0.16mm layer, 2 walls, 10% infill

This printed easily and looks great. Unfortunately it gets clogged up. The poop piles up on the ramp.

@Zivilist

Print Profile

0.28mm layer, 2 walls, 10% infill

It does what it should. Perfect fit and stable.

@RalfDiedrichsen

Boosted

I like it. It printed very well with Sunlu PLA Meta. Have to bey some magnets but it works well without.

@pozbo

Print Profile

0.16mm layer, 2 walls, 10% infill

I printed this in BL Basic PLA and this model matches the aesthetics of the P1S perfectly. function is good 10/10

@DigitizedDreams

Print Profile

0.16mm layer, 2 walls, 10% infill

This Poop Chute was my second Print on the P1S, it has insanely good Quality with the downloaded 3mf file. used Bambu Matte Black Filament with Basic PLA Settings, turned out very good.