Search models, users, collections, and posts
black dragon keep
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
5.8 h
1 plate
Open in Bambu Studio
Boost
16
29
2
2
44
3
Released
Description
Project: blackdragon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA PolyLite Pro Metallic Silver Transmission Distance: 1.5
PLA Prusament Pearl White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #10 (0.88mm) swap to Metallic Silver
At layer #16 (1.36mm) swap to Pearl White for the rest.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (2)