Spring (No Support) by SIR_PRINTSALOT

SIR_PRINTSALOT

Tools>Gadgets

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Spring (no support)

Designer

24 min

1 plate

3.2(5)

Open in Bambu Studio

Boost

106

144

Released

Description

NEEDS TO BE PRINTED HORIZONTALLY, WITH A BRIM AND WITH HIGH STRENGTH FILAMENT (NOT MATTE)!!

AS SHOWN BELOW:

I'm not sure what filaments are good for this print or not, but do not print in matte pla. Basic pla works good, and do not print in bad brands. Let me know what brands and filaments work for you and I can add them here.

Note: When I say horizontally, I mean the side that is flat horizontal to the build plate, as shown above. If you do not print with what I said above, you risk print failure or reduced strength.

Description:

This is a super rigid spring that prints with no supports! I designed this so I could use it in my print button, it fits perfectly and is so strong. I'm sure it can fit whatever application you need it to.

For the button that goes with this spring: https://makerworld.com/en/models/625490#profileId-549891

(it includes print, fire missile and eject)

Comment & Rating (10)

@user_3350364109

Boosted

nice

@SIR_PRINTSALOT

Hello everyone. I apologize for all the trouble everyone has been having printing the "spring (no supports)" model. I did some research as to why this could be happening and I found out that brittle, off brand, and matte filaments are not compatible with this model. I used bambu PLA basic, and it prints perfect every time. I encourage all of you to print it again if it failed before, and let me know if it works with pla basic or similar strong filaments. I appreciate your understanding SIR_PRINTSALOT

@nicoman42

Print Profile

Spring (no support)

broke off the printer

@next_3D

Print Profile

Spring (no support)

cool

@jayzay

Boosted

Many thanks for sharing.

@myungju.ryu

Print Profile

Spring (no support)

Support Issue:It broke without support

The designer has replied

@SIR_PRINTSALOT

Did you print it vertically? it needs to be printed horizontally with a brim

@user_1165743521

Print Profile

Spring (no support)

Strength Issue:printed 2 times, both springs broke in half when compressed

The designer has replied

@SIR_PRINTSALOT

That's weird, I haven't had that problem when using PLA. Try making sure your material is fully dried and, if needed increase the infill or use a stronger material like PETG.