This is a modular stackable storage box. It's also scalable!
Printed with 0,2 mm Layer Heights, 2 walls and 10% Infill.
You will find many different printprofiles (.3mf) of the model with the different patterns and modularity you can choose from.
If you have any ideas to upgrade this model but don't want to make a remix, feel free to ask me down here in the comments and I will do my best to make it a reality! :)
Down here you can see some UPDATES for the storage box (dd/mm/yyyy):
I made a connector which is easy and fast to print so you can easily connect multiple boxes to each other without worrying that they're going to wiggle
I updated the 3mf file 'Stackable_Storage_Box_ALL' and you can find the connector on the last plate named ‘Connector'
UPDATE 05/04/2024: Higher versions for the drawers and holders + Compartments + Renaming:
I made 3 different heights, eacht time for the drawers and all the differend holders
I made 2 compartments for in the drawers (H1 and H2)
I also added sections for the compartments but then a bit smaller so they fit perfect
I renamed everything: H1 (Height1) is the standard height, Now I also made H2 (double) and H3 (triple). There are now ‘Drawer_Sections’ and 'Compartment_Sections'
I added 1 3mf file with everything (it's the one on top): Stackable_Storage_Box_ALL
UPDATE 01/02/2024:New drawer with 4 different sections to choose from:
All in 1 3mf File: Drawer+Sections.3mf
I will upload some more different section patterns in the future, for now you have 4 choices + 1 having no sections
UPDATE 10/01/2024:New patterns for the drawer holder and the top cover:
Holder+Top_Cover_Blank.3mf
Holder+Top_Cover_Hexagon.3mf (Holder did already exist)
Holder+Top_Cover_Circles_1.3mf
Holder+Top_Cover_Circles_2.3mf
UPDATE 07/01/2024:New variations coming:
Different patterns for the holder + top_cover (DONE 10/01/2024)
Different sizes (bigger boxes) → You can scale the boxes in your slicer to the dimensions you like (DONE 29/01/2024)
Sections in boxes - new design so the dividers are modular (DONE 01/02/2024)
This model was inspired by https://www.thingiverse.com/thing:2827563/files
Ein paar Boxen habe ich schon fertig gedruckt 😊. Bin noch recht neu dabei. Kann ich sie einfach von der Breite her vergrößern? Toll wäre, wenn es für die geschlossenen Boxen ein Verbinder geben würde, damit sie, wenn sie nebeneinander stehen, nicht so hin und her rutschen können. Ansonsten sind die super 👍. Danke dafür 😀.
Thank you! That looks great! 😀
Yes, you can scale the boxes in your slicer (for example bambu studio), you just need to make sure that you do 'uniform scale' + scale the top cover with that same percentage. You can also choose to only scale the height, then the top cover stays the same.
The connector is a great idea, I will think of it and will post it soon, probably this week.
Love the design and simplicity of these. I made a connector to connect the parts in between to hold them together so they had a little more stability and uploaded it as a remix option.
Printed 4 and stacked at normal size and then printed two blown up 256% for my daughter, I found 265% to be the max that can fit on a P1S (based on the lid being the largest piece).
I needed to raise my laptop up a little and after looking at various models I settled on this one. I took some measurements and then upscaled the print to 215% in Bambu Studio, I didn’t make any other modifications. The print turned out to be excellent. Now, not only is my laptop raised up to where I want it to be, I get a small storage space underneath. Printed on an A1 with esun filament. Great model, thanks for publishing it.
Comment & Rating (84)