Micro sanding blocks with tightening
Print Profile(3)
Description
Boost Me (for free)
If you like it, you can support me with boost. It is free for you and it will help me a lot with a future projects :)
Membership
Join my subscription and feel free to sell all my stuff with commercial license :)
Here are really micro sanding blocks. :)
I had a request for something small with a short piece of sandpaper. So here they are!
My father in low loves it, he makes Revell 1:48 models. :)
10mm wide sanding block for 120mm long sandpaper - only 4 grams and 13min printing time
15mm wide sanding block for 170mm long sandpaper - only 10 grams and 24min printing time
It's very easy to assemble.
All you need is just M3x8mm hexagon socket screw for 10mm version and M3x10mm hexagon socket screw for 15mm version
.
Be careful - the screw is mounted right to the plastic so be careful when tightening.
I hope you find it useful :)
Everything is designed for printing with standard 0.2mm profile of PLA or PETG and without support.
If you want some specific shapes of sanding blocks, please leave me a note or comment and I will make it for you.
You can check my standard and larger version of sanding blocks
here https://makerworld.com/en/models/616112#profileId-539573 :)
and
here: https://makerworld.com/en/models/619219#profileId-543139
and my Filament and PTFE tube cutter :) https://makerworld.com/en/models/568082#profileId-487887
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (101)