Search models, users, collections, and posts
Print Profile(2)
分体式（0.2mm layer, 5 walls, 25% infill）
Designer
1.3 h
2 plates
0.2mm layer, 6 walls, 25% infill
Designer
51 min
1 plate
Open in Bambu Studio
Boost
8
21
0
0
18
12
Released
Description
Content has been automatically translated.
Simple key holder (key holder)
NEEDS:
- Double-sided tape (you can use wall non-trace tape first and then use 3m double-sided tape to attach the print)
M3×8 self-tapping screws (minimum length 6, self-tapping screws are convenient, can also be used with preinstalled hot melt nuts)
(Don't need to download the parts, the integrated version of the print configuration, already colored, can be customized)
- The 150mm model supports A1mini. It is recommended to support the screw holes at the bottom and remove them afterwards to provide room for the screw head to sink
If you need to use the transfer plate, you can modify the bottom of the print, the front of the hanging ugly is nothing, simply scratch the hook when pressed into it)
(Remove the back support)
Simple key holder
NEEDS:
- Double-sided tape (you can use wall non-trace tape first and then use 3m double-sided tape to attach the print)
- M3×8 self-tapping screws (minimum length 6, self-tapping screws are convenient, can also be used with preinstalled hot melt nuts)
- The 150mm model supports A1mini. It is recommended to support the screw holes at the bottom and remove them afterwards to provide room for the screw head to sink
- If you need to use the transfer plate, you can modify the bottom of the print, the front of the hanging ugly is nothing, simply scratch the hook when pressed into it）
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)