Borussia Mönchengladbach Lightbox
Copyright Claim
Borussia Mönchengladbach Lightbox
Boost
16
26
17
Print Profile(1)
0.2mm layer, 2 walls, 10% infill
Designer
3.5 h
2 plates
Boost
16
26
17
2
73
103
Released
Description
Use my print profile, it printed perfect on my P1S.
Electronics:
I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wires
The power supply and the DC barrel connector I used
https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details
Assembly:
- Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill.
- Measure the length of the light strip and then cut it to length.
- Solder the wires and the barrel connector to the light strip
- Mount everything into the front part
- Fore the back part I used normal aluminum foil with some double sided tape to reflect the light. See pictures
- Close the box
For more details check this light box.
Comment & Rating (17)
All
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Came out very good on my P1P. Profile is very good but Design is a bit to thin at some Places. First Sign i printed came out as good as the second but the Front Plate brokes on the Sides when i tried to take them togehter. TY
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Absolut klasse für unsere Fohlenfans, in den Rückendeckel noch ein Loch für eine Steckbuchse oder eine Kabeldurchführung rein manchen nicht vergessen. Auch kann man noch schön für eine Schraube in Loch hinzufügen um es n die Wand zu hängen, dann würde ich unten in das Vorderteil ein kleines Loch für ein Kabel hinzufügen.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld