FC Bayern München Lightbox
Copyright Claim
FC Bayern München Lightbox
Boost
44
106
52
Print Profile(4)
0.2mm layer, 2 walls, 10% infill
Designer
5.8 h
2 plates
0.2mm layer, 2 walls, 15% infill
Designer
7.2 h
2 plates
0.2mm layer, 2 walls, 15% infill
Designer
7.1 h
2 plates
0.2mm layer, 2 walls, 10% infill
5.8 h
2 plates
Boost
44
106
52
11
273
410
Released
Description
Update 13.03.2024: Added a version with 4 front layer and a version with an extra 5th layer as support if you have the problem that the parts don't stay connected.
Use my print profile, it printed perfect on my P1S.
Electronics:
I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wires
The power supply and the DC barrel connector I used
https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details
Assembly:
- Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill.
- Measure the length of the light strip and then cut it to length.
- Solder the wires and the barrel connector to the light strip
- Mount everything into the front part
- Fore the back part I used normal aluminum foil with some double sided tape to reflect the light. See pictures
- Close the box
For more details check this light box.
Comment & Rating (52)
All
Print Profile
0.2mm layer, 2 walls, 10% infill
Clean print, backpart fits good
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Sehr schön zu drucken Top
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Top👍👍
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
wieder eine gelungende Vorlage. Jetzt noch die COB LEDs reingebuttert und eine Freundin ist Mega glücklich.
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Perfekt! mal sehen wie es dem Kollegen gefällt?
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
lässt sich super drucken
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
(Edited)
1
Reply
Boosted
warum kompliziert wenn es so einfach sein kann! tolle Arbeit
The designer has replied
1
Reply
Vielen Dank für den boost.
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
das Logo ist zu dünn und bricht sehr leicht raus
2
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld