Print Profile(3)
0.2mm layer, 2 walls, 20% infill
Designer
6.5 h
1 plate
0.2mm layer, 2 walls, 20% infill
8.3 h
1 plate
PLA - 0.2mm layer, 2 walls, 20% infill
7.9 h
1 plate
Boost
205
330
70
6
835
588
Released
Description
- Hi! I designed a simple Oculus Quest 2 stand. Its durable, and easily holds the weight of the headset.
- My print was made with PETG (haven't tried it with PLA, so i recommend increasing the infill by 5-10%).
- The small parts are a very tight fit, so you can scale them +/- 3% to make them fit easier.
- I also used supports for the bottom overhangs and big holes, which i recommend doing.
Enjoy the printing!
Comment & Rating (70)
All
Print Profile
0.2mm layer, 2 walls, 20% infill
Such a simple and sleek model, but very functional. My headset had trouble balancing with the battery pack in the rear, so I had to tuck the head strap inward and all is good now. It looks great. Finally have a place to store my Quest 2.
The designer has replied
1
Reply
Glad you like it! btw your headset looks AWESOME
(Edited)1
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Great design! Tried it with PLA+ and increased the infill a bit more for added stability. Still fairly flexible and bouncy when in use, but no structural stability concerns. Love the sleek minimalist design! Thanks again!
The designer has replied
0
Reply
no problem, enjoy 😁
0
Reply
Print Profile
PLA - 0.2mm layer, 2 walls, 20% infill
Had a slight shift in layers at the top of the print, but that could have been the printer. Thanks for adding supports under the headset portion so I didn't have to do it myself. Saved me some time!
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
The designer has replied
1
Reply
Looks very nice 😁
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
it’s a long print- good for overnight if your printer isn’t close by 😂
I appreciate the supports came off easily and a quick sand and it was good to go! made it for a friend of my kid- he said “awesome!”
The designer has replied
1
Reply
Im glad he liked it ^^
(Edited)1
Reply
i boost you i haven't even printed it yet and it look crazy good
The designer has replied
0
Reply
thanks! 😁
0
Reply
Very useful, unfortunately a1mini can not be printed in full, thank you
The designer has replied
0
Reply
ah sorry, it was designed before mini was out I think ;/
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Used some bad PETG and it started to warp off the bed
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
the stand works but it could be a little thicker because when you put the oculus on the stand it bounces a lot.
0
Reply
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld