geniejhang

0.2mm layer height, 5% gyroid infill, 15% infill in the knobs, 5mm brim, 

CMTPrinting

Panacaguy

cover

IMG_20231108_161057902.jpg

IMG_20231108_210922750.webp

IMG_20231109_213147113.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

Don't let the print time fool you. This profile has several combinations of parts to choose from, just pick the plate with the parts you want/need. At right around 2 hours to print and ~85 grams of filament, why not give it a try? Your kids/spouse/office mates will love you!<ul><li>Plate 1 - Base plus Regular Slider</li><li>Plate 2 - Base plus Greedy Slider</li><li>Plate 3 - Regular Slider</li><li>Plate 4 - Greedy Slider</li><li>Plate 5 - Base</li></ul>The settings are the same for each plate, so each piece should come out the same regardless of which plate you print it from.&nbsp;Enjoy! Let me know what you think of it or if you have suggestions for improvement.

My Wife's grandpa used to make these out of wood and sell them at craft fairs. I've modified the design slightly and made it more conducive for 3D printing. Screws onto a standard small-mouth canning jar. The holes in the candy sliders are sized to fit regular plain M&Ms, Skittles, and Reese's Pieces. &nbsp;At right around 2 hours to print and ~85 grams of filament, why not give it a try? Your kids/spouse/office mates will love you!&nbsp;Enjoy! Lt me know what you think or if you have suggestions for improvement.

Mason Jar Candy Dispenser

Global

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models

M&M Candy Dispenser

Candy-Jar for a Candy Bar

AAA Battery Magazine

SpiceDispencer_v1