Case for iPistBit 7 Inch Touch Screen Raspberry Pi
Print Profile(2)
Description
For: iPistBit 7 inch IPS LCD TFT Display HDMI Touch Screen 1024x600 Resolution Capacitive Touch Screen for Raspberry Pi 5 4 3 3B+ 2
I could not find a cover to protect the back electronics of this iPistBit 7 Inch Touch Screen IPS 1024x600 HDMI for Raspberry Pi. It works on models 3, 4 and 5 of the Raspberry Pis. There is also a bezel that protects the edges of the LCD and touchscreen assembly. After printing gently, but firmly insert the screen into the case. Attach the corners with four (4) M2.5X8mm or m2.5X10mm tapered screws. The hardware to install the Raspberry Pi comes with the screen. The screen is powered by the Pi through the HDMI connector. There are three links below to purchase this screen on Aliexpress. It is very affordable and a good quality product.
There is an optional stand that can be printed. It is separate print profile.
Once the back cover is on it is a little bit tricky to insert a new SD card. So, I created an SD card insertion tool helper. Just remove the old card with needle nose pliars, if one was already inserted, and inert the card with the tool about half way. Remove the tool and seat the card in the socket with your finger. Link to insertion tool: https://makerworld.com/en/models/592344#profileId-513986
Links to this screen:
1: https://s.click.aliexpress.com/e/_DnrnO0L
2: https://s.click.aliexpress.com/e/_DCNbWgL
3: https://s.click.aliexpress.com/e/_Dm3sIgb
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)