A skeleton walking in a cemetery - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Silver Transmission Distance: 2
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Silver
At layer #21 (1.76mm) swap to Lemon Yellow
At layer #26 (2.16mm) swap to Ivory White for the rest.