MTG Poison Counter / Tracker - 4x Player 0-9 Dials

If you like this model and it's not too much trouble, please hit the 👍 button - it helps out a lot 😀

This is a 4 Player / Commander Poison counter / tracker for Magic the Gathering. It is 6 separate parts: a top, a bottom and 4x dials in the middle:

• 4x total individual trackers - one for each player
• Each player's counter has a dial that go from 0-9 to count how many poison counters each player has
• 2x different body designs:
  • #1 = player icons + poison icon
  • #2 = blank

Assembly

For the dials, each person has their own dial. There is a left dial and a right dial. When positioned correctly, the numbers on each dial should line up (nearly) 100% straight inside the window. The parts are labeled in Bambu Studio as well.

The Poison Bar's body should snap together while allowing the dial to spin. It does take a bit of force to fully snap the pieces together. Apply pressure at each connector on the top and bottom body pieces when snapping together for each dial. You will hear a bunch of snapping sounds, don't be alarmed (each connector snapped like 5 or 6 times for me). Once fully snapped together, there shouldn't be any gaps between any of the pieces.

The dials are a bit tight so the number stays in place in case of an accidental bump or drop. They will quickly loosen up a small amount after spinning each dial a few times. For even more security, try adding a small drop* of super glue to each connector when snapping all the parts together.

* If you use too much glue, the glue will seep out onto the dials and become glued in place and not be able to spin. Ask me how I know that… 😉

Checkout My Other Counter Bars Similar to This!

Be sure to check out my MTG 3D Print Projects page if you are interested in even more MTG prints like this from myself and other very talented makers!