Cell Spool - Bambu Lab AMS ok by Sergiu_I

Sergiu_I

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.25mm layer, 3 walls, 30% infill

Designer

6.3 h

2 plates

4.9(23)

Open in Bambu Studio

Boost

125

276

528

179

Released

Description

I was running out of good spools for AMS. Waiting for the few BL spools to empty to re-spool them was frustrating and non practical. I decided to print a few spools with identical geometry as the original BL spools. I have included in design the very practical BL dismounting feature and a large desiccant tower.

I kept the same theme as the spool winder - cell pattern for improved visual, low material consumption and good mechanical proprieties.

The desiccant tower is automatically closed by the cover disc. This spool can be used without any problem in the AMS or in the spool winder without any flanges.

I used ABS and the closing mechanism between disks has worked perfectly. I did not test any other material.

The spool winder in pictures:

https://makerworld.com/en/models/561571#profileId-481024

Version V02 added for both models - in fact just the cover has now a continuous zone where it is possible to place a label. The models from the first version are kept as stl files with V01 naming added.

Comment & Rating (40)

@suezou

Boosted

I had a roll of PLA that was never working properly on the AMS so I reinstalled it on this spool and now it works perfectly on the AMS, perfect size and weight.

@Pastaga51

Print Profile

0.25mm layer, 3 walls, 30% infill

Extremely efficient, I have already rewound a dozen spools.

Show original

@Weltraumpenner

Print Profile

0.25mm layer, 3 walls, 30% infill

The spool looks great and it's perfect for my purpose (rewind paper-spools). Unfotunately the interlocking is so strong, that I can't disassemble it anymore.

@stravi

Boosted

Print Profile

0.25mm layer, 3 walls, 30% infill

Thanks, very well design

@rubarbadave

Just the perfect spool to fit with the winder. I printed it with eSun PLA+ and this spool looks indestructible. Everthing well designed as always. Thanks Sergiu. I also the pics of the remix I made from your model and thanks to you. https://makerworld.com/en/models/835924#profileId-781185

(Edited)

@printmaject1969

Boosted

Print Profile

0.25mm layer, 3 walls, 30% infill

Love it, both the spools and the rewinder!!

@EnricoLuzi

Working on AMS LITE ?

The designer has replied

@Sergiu_Irimie

Regretfully NO

@friskyplatypus

I'm not sure if this is a joke or not but I'll treat it as a serious question. Looking at the model you can see that the inner diameter is way too small to fit on the AMS Lite Rotary Spool Holder. Even with the Rotary Spool Holder removed the diameter of the spindle exceeds the diameter at the center of this spool.

@tiagolcorreia

Replying to @friskyplatypus :

I was thinking something like that too but realized tha this spool is only for the AMS, not AMS Lite. Not even the traditional spool holder.

@Thor3

I hope you get banned, you exploit the competition showcase with a model that has nothing to do with getting downloads!Reported!

The designer has replied

@Sergiu_Irimie

Once again: "Whether it's the intricate structure of a virus, the complex architecture of a cellular organelle, ..., your designs should help bring the microscopic world to life." So ... the complex architecture of a cellular organelle... did you notice the title and the main architecture for my design? I have tried a bionic design solution that fits perfectly within the requirements for this contest. (In cell biology, an organelle is a specialized subunit, usually within a cell, that has a specific function. The name organelle comes from the idea that these structures are parts of cell.)

(Edited)

@nyanchovy

Boosted

Replying to @Sergiu_Irimie :

@Sergiu_Irimie Pretty obvious how the theme fits, sucks you get dips**t comments like that. Just wanted to say I use your model all the time, still, I'm busy printing the spare spools now too. You rock! Boosted.

(Edited)

@Sergiu_Irimie

Replying to @nyanchovy :

Thanks, no worries, just an over-reactive fake user...

@mikedavistx

How do you think this would work using a .8 nozzle?

The designer has replied

@Sergiu_Irimie

I do not have much experience with large nozzles to give a clear statement. It might work - you have to check in slicer if any holes for the dessicant tower are produced as the clearance between holes is minimal.

@chenge

Boosted

Great work

The designer has replied

@Sergiu_Irimie

Thank you!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

AMS Saver Spool - fits Bambu reusable spools

Print Profile(1)

Description

Comment & Rating (40)

License

Related Models

AMS Saver Spool - fits Bambu reusable spools

Bambu Lab Reusable Spool light

Bambu Reel Repair Hub

Bambu Lab spool silica gel container