Retraction Test / Bambu Lab P1P P1S X1C
Copyright Claim
Retraction Test / Bambu Lab P1P P1S X1C
Boost
114
231
71
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
19 min
1 plate
0.2mm layer, 2 walls, 15% infill
22 min
1 plate
Boost
114
231
71
1
647
539
Released
Description
A simple but effective shrinking tower, it is a little bit bigger than the normal ones so that the cooling of the filament is not a problem and does not give false results.
Comment & Rating (71)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
YES!!! :D
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Front is at 205 temp with Z hop type set to spiral, back at 210 temp with Z hop type set to auto.
Retraction settings for both:
Length: 2mm
Retract and Detract speed: 40mm/s
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
the best test to test the filaments, while the printer goes to the monitor I change the temperatures and understand which is the best.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Changed nothing for sunlu silk. Came out nicely thanks 👍🏻
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed perfectly
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
think this may be about as good as it gets,
this was in pla-cf btw not
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
useful
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good test, PA with actively heated chamber at 60C
0
Reply
well didt not change a thing from default retraction settings. cant see a wisp at all.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Quick and easy!
The designer has replied
1
Reply
thanks ❤️
0
Reply
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld