Stackable box for coffee stuff

I redimensioned to 17 x 14 x 20 cm to organize my coffee stuff, fitting also Hario V60 02 packs, but also some minor accessories and supplies like Aeropress filters and parts, thermometers, small scale, paper filters for espresso baskets and many other small stuff that coffee nerds like me collect.

But I still wanted to keep it stackable for future modular improvements in my cabinet organization.

I printed this one in PLA from Tecbears, using a Sovol SV07 Plus, Cura slicer, 205 degrees, 75 degrees bed temperature. I used brim with 8 lines count because my printer seems to have issues printing large flat objects tending to warp and lose bed adhesion, but you may try without it depending on your printer. Other configurations I used: speed 220 mm/s, acceleration 6000 mm2/s, fan speed 50%, grid pattern with 20% infill density (very strong, you may try less, maybe 15%).

If you are a espresso enthusiast, I invite you to visit my website where I'm building a series of tutorials for dummies: www.espressohackers.com and on YouTube: https://www.youtube.com/@EspressoHackers 

The idea is to make available a high performance espresso machine for the enthusiast at a low cost, but simple enough for anyone to make, not only the DIYers.