Mandalorian - Hueforge
Print Profile(3)
Description
This is 5 colour Hueforge of Mandalorian from Star Wars universe.
Added also 4 colour version, instructions in print profile description.
I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini.
Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.
If you want stand for this print check out my Simple vertical stand.
If you like this picture, you can look at my other Star Wars pictures here in this collection:
https://makerworld.com/en/collections/3849110
Boost Me (for free)
I print all of my creations myself.
If you like my work, pls send me a boost, it will help me make more.
Feel free to PM me if you have some idea for a nice picture.
Thank you.
Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA - SILK Spectrum Spicy Copper Transmission Distance: 2.5
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Spectrum Sterling Silver Transmission Distance: 1.8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Spicy Copper
At layer #10 (0.88mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Sterling Silver
At layer #18 (1.52mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (21)