Project: mosaic.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm
Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA PolyTerra Army Blue Transmission Distance: 0.3
PLA Bambu Purple Transmission Distance: 1.4
PLA Overture Green Transmission Distance: 1.1
PLA PolyLite Pro Magenta Transmission Distance: 1
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA Overture Matte White Transmission Distance: 3.7
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Army Blue
At layer #9 (0.8mm) swap to Purple
At layer #10 (0.88mm) swap to Green
At layer #12 (1.04mm) swap to Magenta
At layer #14 (1.2mm) swap to Sunrise Orange
At layer #15 (1.28mm) swap to Savannah Yellow
At layer #16 (1.36mm) swap to White for the rest.