art created using hueforge

Size can be altered depending on the printer but only alter x and y axis, if z is altered you will not achieve the same outcome

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.2mm

Filaments Used:
JAYO PLA+ Black
JAYO PLA+ WHITE
JAYO PLA+ LIGHT GREY

JAYO PLA+ GREY

Swap Instructions:
Start with Black
At layer #10 (1.64mm) swap to Grey

At layer #13 (2.12mm) swap to Light Grey
At layer #20 (3.24mm) swap to White for the rest.