EAA SAR P2K Frame
EAA SAR P2K Frame
Print Profile(0)
Description
For a light duty/workable frames:
* Material: eSun PLA+
* Print Temp: 235 C
* Bed Temp: 60 C
* Bed Prep: Wipe clean, apply a thick layer of Elmer’s glue stick. Kapton tape is recommended since this frame will really stick to the bed tight if you use the STL with the raft.
* Infill: 100%, Rectilinear Fill
* Enclosure: None
* Orientation: not super critical but using the STL with the raft will result in far less warp. Warp is the enemy of this project.
* Supports: full, hexagonal infill, sheathing on infill optional but recommended if your slicer supports it.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
