[BaBo duo] AMS riser module

Copyright Claim

[BaBo duo] AMS riser module

Boost
489
1077
306

Print Profile(3)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

[updated 18.03.24] BaBo duo riser honeycomb
[updated 18.03.24] BaBo duo riser honeycomb
Designer
18.2 h
3 plates
4.9(85)

[Updated 15.12.23] BaBo duo riser
[Updated 15.12.23] BaBo duo riser
Designer
15.3 h
3 plates
4.9(66)

[updated 11.12.23] adapter for LED Lamp Kit 001
[updated 11.12.23] adapter for LED Lamp Kit 001
Designer
56 min
1 plate
5.0(22)

Boost
489
1077
306
68
1.5 k
1.8 k
Released

Description

Create your BaBo organizer! A system created to store them all!

 

Description:

This is the BaBo duo riser modul. This riser can be mounted under the BaBo duo modules to allow better visibility and the top glass can be stored while printing PLA. It also offers an adapter for the LED Lamp Kit 001 to improve the lighting when working, there is also the option of installing LED strips up to a width of 12mm if you prefer them. Also a spool holder is available for the honeycomb version.

 

Please do not use the LED lamps during the lidar calibration process, it may distort the results.

 

It is only compatible with the [BaBo duo] modules and not with the [BaBo] modules, but you can use all the [BaBo] inserts.

 

Thanks to Mr.Quen for allowing me to use his pictures.

 

BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.

 

Links:

Update:

(31/10/23)

  • improved connection between modules
  • print profile optimizations

(07/11/23)

  • added two TPU lips to prevent the glass from slipping out

(17/11/23)

  • bottom gasket option and Honeycomb version added

(24/11/23)

(15/12/23)

  • added LED stripes guides (In the "Raw Model Files" you can find a model that you can stick to your riser if you haven't printed the current version.)
  • removed bottom gasket

Printing:

Layer height: 0.2

Supports: Yes

Brim: No

Material: all

 

Assembly:

Follow the instructions in the picture.

  • printed parts
  • 4 x M3x8 countersunk screws
  • optionally, a second set of seals can be mounted below

If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!

Comment & Rating (306)

Please fill in your opinion
(0/5000)

Fantastic design. I used the designer’s profile and the print came out flawlessly. Fits perfectly on my P1S Only a couple suggestions I would make: 1. Increase the top support interface z distance a bit. The supports were a bit difficult to get off. Not a big deal though. 2. I ran a print with the riser on and the top glass on the shelf that keeps the top open. It did rattle so much that the glass worked its way off the shelf and if I hadn’t noticed, would have fell to the ground and shattered. Just a small lip at the end would completely solve this. I am wondering if some double sided tape on the bottom of the riser to secure it to the printer would help reduce the rattling as well. looking forward to printing the rest of the drawers
(Edited)
The designer has replied
5
Reply
Thanks for your feedback, the lip at the end is a great idea. I'm also trying to add a small angle of 2-3 degrees towards the back. I haven't had the glass slip out myself, but it's a very serious problem.
2
Reply
Replying to @Willi3D :
I am waiting for the screw I need to show up in the mail before I can print this out and use it. Do you have any idea how long before you will modifiy this with the lip for the glass? I would rather wait until that is ready before printing it. Thanks!
0
Reply
Replying to @Overlord_Rylin :
I could design it tomorrow, but I don't know when I'll be able to test it.
(Edited)
0
Reply
Boosted
Print Profile
[Updated 15.12.23] BaBo duo riser
Really really nice model! I was looking for an AMS riser for quite some time but never found one with both design and functionallity fitting my taste. I love this one! Really great work on the engineering side: everything fits tight, no gaps, all really thought-out. First I was a little bit worried that the parts are only connected by one screw each on the bottom side, but as soon as you put something on top (like the AMS adapter modul) all together becomes really rigid. I prefer a nice surface finish over short printing time a lot. So inspired by @half_a_yoyo I used the original print profile and switched to the 0.12 profile, keeping all the other settings. Each plate took 14 hours plus 2 hours for the TPU plate, so all together around 30 hours. I used Bambulab PLA-CF and the surface looks stunning! In real it looks even a lot better than on the pictures ;) No problems with removing the supports. Thanks for sharing your work with us @Willi3D
The designer has replied
4
Reply
Excellent print! Looks absolutely awesome! 🥰
0
Reply
Wow, that looks really impressive. Thanks for your great feedback. The pictures look so good that I would like to use them, of course only with your permission. To my defense. :D haha ​​.... I sometimes have to print the prototypes several times until I'm really satisfied (see picture). That's why I print everything with a layer height of 0.2, otherwise everything would take a very long time. Again, really good job. ;)
0
Reply
Boosted
Replying to @Willi3D :
Sure, you can use my pictures for whatever you wann :)
0
Reply
Print Profile
[updated 18.03.24] BaBo duo riser honeycomb
This works so well. I printed the whole thing in PETG and it is super strong.
The designer has replied
7
Reply
I love this black on black with the P1S. Looks really cool.
0
Reply
Boosted
Great print! I like the honeycomb inserts, where did you find those?
(Edited)
1
Reply
Print Profile
[updated 11.12.23] adapter for LED Lamp Kit 001
nice. use it for my extra camera in the P1S
The designer has replied
3
Reply
Sehr cool. 😂👍
(Edited)
0
Reply
Replying to @Willi3D :
dachte ich mir auch..... 😁 einzige was ich vielleicht bei Gelegenheit mal basteln kann ist ein Halter für die Kamera passend in das Loch. dann sitzt sie noch besser
0
Reply
was ist das für ne cam? die position für die cam finde ich eigentlcih sehr gut man sieht alles gleichmässig :D
0
Reply
Print Profile
[updated 18.03.24] BaBo duo riser honeycomb
I've tried almost all AMS risers available. I think this is best one. Module system is very smart, stackable. It organises all my workspace. Led option for the logo is very smart. I'm using it as a status light. It pulses in green during print and pulses red when there's an error. It's solid other times. Very useful especially when I wake up in the evening and I don't have my phone/laptop with me.
The designer has replied
2
Reply
Hey Serhan, nice to see something from you, I'm really happy that you also like the BaBo duo system. Thank you for your make and your support.
0
Reply
Replying to @Willi3D :
Thank you Willi. Following your work closely ;)
0
Reply
hallo. wie hast du das hinbekommen das du das als statusbeleuchtung benutzt. gibt es dazu ein fertiges projekt wonach man das nachbauen kann. woher bekommt man denn das signal wenn ein fehler ist. könntest du mir da vielleicht einige infos zu geben. ich bin gerade diesen riser mit aufsätzen am drucken. Mfg stefan
0
Reply
Is there anything to prevent the sagging in the middle of the duo? maybe a attachment point in the front center to stabilize the front that isn’t supported ?
The designer has replied
1
Reply
Try this. https://makerworld.com/models/72610#profileId-77130
1
Reply
worked out great thank you
1
Reply
The white consumables look to be PLA support consumables?not recommended for model body printing.
0
Reply
Print Profile
[updated 18.03.24] BaBo duo riser honeycomb
Removing the support in the honeycomb was hard. but overal a top print, can't stop printing. waiting for the screws, thank you.
The designer has replied
3
Reply
I hope you'll like it Ronny. :)
0
Reply
My name in lights - yes I am vain 😂 This is a fantastic, well designed riser fitted here onto the P1S. I have been printing BaBo drawer units for the past couple of weeks and know how well they are made so was very keen to print this rister. Printed here in eSun Matte Black & Morandi Green with 20% infil and 3 walls - solid as a rock and tight fitting! The COB leds are USB powered and powered by a dedicated power source
The designer has replied
2
Reply
Good job! :D
1
Reply
Excellent work @Willi3D ! Well thought out model, but without all the frippery that some others add. *thumbsup* Printed with PLA basic with 0.12mm layer height and using PETG-Support like shown on YT -> https://www.youtube.com/watch?v=Matf1Mna2zI Surface - even the supported - looks like charm. The only disadvantage is printing time of almost 16 hours. Plate 2 will take 15 hours. :o :D --- Hervorragende Arbeit @Willi3D ! Gut durchdachtes Modell, aber ohne den ganzen Firlefanz, den manch anderer zufügt. *thumbsup* Gedruckt mit PLA basic mit 0,12mm Layern und mit PETG als Supportmaterial, wie in der Tube gezeigt -> https://www.youtube.com/watch?v=Matf1Mna2zI Die Oberfläche - auch die supportetet - sieht aus wie geleckt. Der einzige Nachteil sind die fast 16 Stunden Druckzeit. Platte 2 wird nochmal 15 Stunden brauchen. :o :D
(Edited)
The designer has replied
1
Reply
Vielen Dank! 😁👍🏻
0
Reply
Replying to @Willi3D :
Keine Ursache. :) Die Schrauben hab ich übrigens sogar beim Hornbach bekommen. Das hatte ich mir schwieriger vorgestellt. 8)
0
Reply
Hallo Willi, ich habe noch mal eine Frage: Wie hast du das Problem mit dem längeren Weg vom AMS zum Buffer gelöst? Beide Kabel sind jetzt zu kurz bei mir. Ich bin jetzt fast fertig mit dem ganzen Projekt, da ich so gut wie alles von dir gedruckt habe ;-)
The designer has replied
1
Reply
Hallo Oli, das sieht verdammt gut aus! Gut gemacht. 👍 Ich habe mir ein längeres Buskabel gekauft. Nach dem der Shop umgestaltet wurde ist dieses aber nicht so einfach zu finden. https://eu.store.bambulab.com/de/products/bambu-bus-cable-4pin?variant=43372657443035
1
Reply
Replying to @Willi3D :
super :-) Vielen Dank. Bestellt und am Montag kommt es und dann kann ich endlich anfangen nicht nur Sachen für den Drucker zu drucken. Ich bin gespannt was noch in die Reihe an Modellen von dir kommt.
0
Reply

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.