This universal holder is for those who have no place to put their phone in the car, want to have the phone horizontally and have an unused CD drive. It is designed for phones up to 80mm wide and the minimum phone width is 65mm. You will need instant glue and a rubber band from your sister, girlfriend or wife.

1.Thread the rubber band as shown in the picture.

2.Stretch it on the front cover so that it is clipped.

3. Screw the back of the cover firmly with a short screw.

4.Insert the block into the part with the hinge so that it does not extend into the moving part. Use pliers. It is very difficult. Then screw in the two long screws as shown in the picture, but not tightly.

5.You can also loosely screw the two short screws on the side of the holder into the CD drive

6.Glue the rubber parts in place.

7.Try the holder in the car and adjust the inclination as needed. It is better to be a little higher because after inserting the block it will drop a little. Insert the block as far as it will go and tighten all the screws.

Enjoy your phone holder.