This is an original piece of artwork that I drew a few years back and thought it would be cool to turn it into a hueforge and share it here.

I hope you enjoy and Id be happy to see what different color combinations people print this in.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x317.65mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Plus Overture Black Transmission Distance: 1
PLA Polyterra Army Red Transmission Distance: 4.5
PLA Elegoo Pink Transmission Distance: 5
PLA Elegoo White Transmission Distance: 4.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Army Red
At layer #15 (1.28mm) swap to Pink
At layer #19 (1.6mm) swap to White for the rest.

I personally work with a Bambu Labs A1 mini so scaling it down to my bed plate makes the color changes happen on different layers.

Swap Instructions for A1 mini:
Start with Black
At layer #5 (0.48mm) swap to Army Red
At layer #8 (0.72mm) swap to Pink
At layer #10 (0.88mm) swap to White for the rest.