How to support me!
If you like my work, consider joining my Patreon where you can have a say in what I print next! Only Patreon members get to see those items and you can even sell them at a certain tier. Finally, if you’d like to learn my tips and tricks for making a hueforge start to finish I offer a coaching session to some of my patreons! Thank you for all your support!
www.patreon.com/CloudyNostalgia
Also, if you have any questions about how to print a piece of mine or if you need help troubleshooting, feel free to join my discord server where you can ask for help!
https://discord.gg/fKEjJD3n9z
Also, I upload videos every so often showing how to videos for Hueforge. If you’d like to view here is the link:
https://www.youtube.com/channel/UCG1IDrymVjUyYng7nXrdGnw
**IMPORTANT INFORMATION**
Project: Deadpool Whoops.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 157.04x235mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 3.2mm and the Actual Depth is 3.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 3.8
PLA BambuLab Basic Yellow Transmission Distance: 5.2
PLA BambuLab Basic Jade White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #21 (1.76mm) swap to Red
At layer #29 (2.4mm) swap to Yellow
At layer #34 (2.8mm) swap to Jade White for the rest.