These are the fragile parts of the REALM nerf blaster.

 If they are damaged during use, you can download and print replacements yourself.

When using a 0.4 mm nozzle, set the layer height to 0.2 mm, with 8 wall layers and infill greater than 45%, using spiralized contour infill.

When using a 0.6 mm nozzle, set the layer height to 0.24 mm, with 7 wall layers and infill greater than 45%, using spiralized contour infill.

These fragile parts will be upgraded in the future 400 FPS version. Once completed, we will release the sales information as soon as possible. Please stay tuned to our Facebook updates.

这是领域NERF发射器的易损件，如果你在使用过程中出现损坏情况可以自行下载打印。

当你使用0.4喷嘴时，层高0.2mm，墙层数8，填充＞45%，螺旋体填充。

当你使用0.6喷嘴时，层高0.24mm，墙层数7，填充＞45%，螺旋体填充。

这些易损件将会在未来的400FPS版本中得到升级，完成后我们会尽快发布销售信息，请持续关注Facebook动态。