Star Wars

Fan Art

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Tough Cream White Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #5 (0.48mm) swap to Ice Blue
At layer #12 (1.04mm) swap to Cream White
At layer #27 (2.24mm) swap to Ivory White for the rest.

For the Pictures I used BL Galaxy Blue as Backround. Matte or Basic Black should do better.