As part of my 80's nostalgia planning, I made a set I had as a child, the 6826 Crater Crawler. I had already submitted it, but someone complained when they found the project divided into several parts and the administrator closed the project. Never mind, I'll present it again in a single project (some people should mind their own business). I have left the cad files for any tolerance changes and obviously before printing check the print specifications to your liking. I recommend a 0.2mm extruder when printing the minifigure torso. Have a good life and don't be envious of projects that aren't yours, which I personally feel like sharing out of nostalgia for youth.
Each plate must be printed with a 15 percent linear three-fill, for the TPU I recommend a 25 percent linear fill, for the yellow minifigure I recommend replacing the extruder nozzle with a 0.2 one and I recommend respecting the colors for maximum color rendering. I left the project open so modify the printing parameters as you wish
I loaded the project generalized with a 0.4 extruder, but having left the project open, I advise you to vary the extruder head diameter, filling, etc., to your liking. I recommend a 25 percent linear filling for the TPU parts and a 0.2 extruder head with gyroid texture for the minifigure