War, War never changes…

And neither does the ice cold refreshing taste of Nuka Cola!

My take on the classic Nuka Cola bottle with a snap on cap. The slender bottle, the rocket fins, and that classic red cap. The new currency of the wasteland. Fun sized for the A1 Mini at 172mm tall. Nuka Cola embossing is on both sides.

Your A1 Mini's textured build plate needs to be 100% clean. Not swiped with alcohol, or a quick wipe down. If you want success with this bottle or the caps you need to SCRUB that build plate with Dawn and hot water.

If you are looking for the full sized bottle for other printers you can find it here: https://makerworld.com/en/models/502817#profileId-422444

Prints in vase mode with 1mm thick walls (Yes, with a .4 nozzle!) so its remarkably durable for a vase mode print. Translucent PETG is the best material. Example printed in Sunlu clear PETG.

Waterproofness NOT guaranteed. A coat of Krylon Fusion clear on the inside will seal it up right. Spray inside, swish around for a bit, pour out the extra and Bobs yer uncle! Let is cure for a week before adding any liquids.

Snap on caps available in separate profile and print great in PLA+.

Enjoy and remember to be careful out in the wasteland, vault dweller!