Crocodile hueforged

Here you can find all my HueForge creations and frame for 130x130mm , https://makerworld.com/en/@MicheleMM3D/collections/503504

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

The Model is 130x130mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #9 (0.8mm) swap to Orange
At layer #10 (0.88mm) swap to Beige
At layer #14 (1.2mm) swap to Jade White
At layer #22 (1.84mm) swap to Yellow for the rest.