All Gave Some
Copyright Claim
All Gave Some
Boost
2
1
2
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
2.8 h
1 plate
Open in Bambu Studio
Boost
2
1
2
0
0
1
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x76.78mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Protopasta Good as Gold Transmission Distance: 5
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Good as Gold
At layer #19 (1.6mm) swap to White for the rest.
Comment & Rating (2)
All
Printed very well! I used PLA Elegoo Black (TD: 0.2) and PLA BambuLab Basic Gold (TD: 2.9) in lieu of the OP's Black and Gold choices. Came out really decent! I believe I'm going to reprint it using PLA BambuLab Basic Bronze, to give it that look similar to the plaques that the VA would provide.
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution
© 2024 MakerWorld