Filament painting /hueforge of Tiger breaking through glass
created with filament painting technique using hueforge software.
if you want to scale, do it only with x and y axis, z must be the same as original.
if you don't have ams just put pause on specified layers and swap filament manually
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to dark/light Gray
At layer #12 (1.04mm) swap to Orange
At layer #17 (1.44mm) swap to White for the rest.