Basic Hairbands
Basic Hairbands
Print Profile(2)
Description
Easy to print hairbands. They fit my wife. They are 12.5cm wide at the widest point and 15cm high.
The normal version is 1cm thick all the way around. The version with the tapered width is 2cm wide at the top and graduates down to 1cm thick at each side at the bottom. The tapered width version is stiffer.
Printing
They are made to be printed with the front side directly on the print bed with no supports with a 0.2mm layer height. I used a 0.4mm nozzle. The profiles I have provided here were used to produce the models in the above pictures with Extrudr NX-2 matte orange and blue.
Support
If you like our work please consider joining our club on Printables!
Comment & Rating (24)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
