Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 67.73x90mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA BambuLab Basic Cyan Transmission Distance: 1.9
PLA BambuLab Basic Orange Transmission Distance: 5.9
PLA BambuLab Matte Scarlet Red Transmission Distance: 1.9
PLA BambuLab Basic Gray Transmission Distance: 0.4
PLA Polylite Cold White Transmission Distance: 0.8
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.52mm) swap to Ivory White
At layer #14 (0.68mm) swap to Cyan
At layer #21 (0.96mm) swap to Ivory White
At layer #24 (1.08mm) swap to Orange
At layer #35 (1.52mm) swap to Scarlet Red
At layer #39 (1.68mm) swap to Gray
At layer #41 (1.76mm) swap to Cold White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.