Poop chute - left & right side - customize bucket Remixed by clavo

Remixed by

clavo

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

left and right sided. Includes a 180x125mm bucket

Designer

5.9 h

3 plates

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Why another poop chute?

I have two X1C side-by-side and for the left one there is no space for a poop chute which goes to the left side. I then discovered the model by jgreat, but I didn't liked that they look different and I didn't want a connected bucket either.

So I have designed a left-sided poop chute which visually corresponds to the right-sided one. I have also made the right-sided chute steeper.

Customize your bucket

As the distance between the printers doesn't have to be the same as mine, I created the bucket in OpenSCAD so that you can define all dimensions as you wish. So just click on “Customize”.

Btw: both chutes end at a height of approx. 65mm.

How to mount

The chutes are mounted to the printer using the existing screw holes of the printer. I used the screws of the spool holder which came with the printer. The chutes have a small hole on the outside through which a hex key fits (also came with the printer).

Comment & Rating (4)

@user_2077412802

These are very nice, i like them. They fit the holes nicely. The short one blocks the ethernet port on an X1E. I use WiFi so its no big issue. I dont print the bucket, i use the cardbord packaging the accesories come with. Just for complete feedback.

The designer has replied

@clavo

Thanks for the nice and detailed feedback. I hadn't the ethernet port in my mind. I will check if it's possible to design the model without covering it.

@user_2077412802

Replying to @clavo :

Here is the back of the X1E.